§ 4.4. Reduced building setbacks in existing subdivisions.

A setback of less than that required by sections 4.1 and 4.2 may be permitted by the zoning administrator in an existing subdivision which was platted prior to the effective date of [the ordinance from which] this appendix [is derived]. This setback reduction is permitted where the platted lot size does not allow compliance with setback requirements and where there is at least one main building on either side of the applicant's lot, within 600 feet of the proposed site that is built to less than the required setback. In such case, the setback shall be the average of the setbacks of the nearest main building on each side of the proposed site or, if there is an existing main building on only one side, the setback shall be the average of the existing building's setback and the required setback. Any other setback may be permitted by the board of adjustment according to section 14.51(4), upon a written finding of unnecessary hardship.

(Ord. No. 86-OR-03, 8-19-1986)